2021 Gehl Track Loaders RT135
- Year 2021
- Make Gehl
- Model Track Loaders
- Engine Model: 4TNV88C-KMS Tier IV
2021 Gehl Track Loaders RT135
Features may include:
PerformanceThe Gehl RT135 Compact Track Loader is taking performance to the next level.
- Compact dimensions combined with stellar power makes the RT135 perfect for tough jobs in confined spaces.
- Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work.
- Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
The RT135 features a new, state-of-the-art, fully-adjustable operator's cab.
- Sound reduction material within the cab suppresses outside noise for a quieter operator environment.
- A front-lifting restraint bar with integrated armrests provides personalized comfort and increased safety.
- Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
- Hydraloc™ System - Brakes and hydraulics are applied automatically whenever the operator raises the restraint bar, leaves the operator's seat or switches off the ignition.
- Creature comforts include automatic dome light, cup holder, 12-volt outlet, storage tray and multiple adjustable air vents.
Controls on the Gehl RT135 Compact Track Loader are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.
- Adjustable Joystick Pilot controls provides the operator true 1:1 proportional control over the drive system.
- Standard Hydraloc™ system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, opens the door or switches off the ignition.
- Standard ISO drive pattern
- Multi-purpose LCD display provides easy readout during operation.
- Easy Manager Telematics
The RT135 is equipped with an all-new Yanmar Tier IV naturally-aspirated diesel engine.
- Automatic glow plug heating system provides superior cold-weather starting.
- After treatment meets all Tier IV requirements through proven technology.
The R135 has amped-up hydraulic systems which incorporate intuitive design for precise controllability.
- Standard proportional auxiliary hydraulic control gives the operator the ability to adjust attachment speeds with infinitely adjustable flow control.
- Attachments changes are clean and easy with flat-faced quick couplers that allow for changes by hand instead of tools.
- Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
The robust lift-arm on the RT135 Compact Track Loader is designed for optimal strength, visibility and capacity.
- Additional reach and increased dump height result in more efficient load placement and overall performance.
- Low-profile design provides outstanding forward, rear and side visibility.
- Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
- Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
- Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
Engine
Engine Manufacturer
Yanmar
Engine
Model: 4TNV88C-KMS Tier IV
Engine Type
4-Stroke Naturally Aspirated
Displacement
133.6 cu.in./4
Engine Power
Gross Power @ rpm: 46.6 hp @ 2500
Starter
Cold Cranking Amps at Temperature: 800 CCA @ 0°F
Electric
Alternator
12V/100A
Battery
Battery
Battery Volts: 12V
Operational
Operating Conditions
Bucket Breakout - Tilt Cylinder: 3,500 lbs. | Bucket Breakout - Lift Cylinder: 3,730 lbs.
Operating Speed
Ground Speed - Single Speed: 6.2 mph
Hydraulics
Hydraulic Flow
Auxiliary - Rated Speed: 16.8 gpm
Hydraulic Pump
Transmission Pump Type: Hydrostatic Pump Transmission
Hydraulic Type
Motor Type: Radial Piston
Maximum Pressure
Ground Pressure: 6 psi
Dimensions
Dimensions
Reach - Fully Raised: 23.3" | Dump Angle - Fully Raised: 40° | Maximum Rollback Angle - Fully Raised: 98° | Maximum Rollback Angle at Ground: 28° | Carry Position: 6.5" | Maximum Rollback Angle at Carry Position: 28° | Angle of Departure with Standard Counterweight: 28° | Crawler Base: 46" | Digging Position - Above Ground: +0.7"
Overall Height
Operating - Fully Raised: 144.5" | ROPS: 76"
Overall Length
Bucket - Standard Counterweight: 121.1" | without Bucket - w/o Counterweight: 92.9"
Overall Width
Less Bucket: 57"
Height
Hinge Pin - Fully Raised: 110" | Dump - Fully Raised: 83.6" | Specified: 58.8" | Reach at Specified: 20.3" | Dump Angle at Specified: 75°
Width
Bucket: 60" | Track shoe: 11.8" | Track: 11.8"
Ground Clearance
8.4" | Radius - Front With Bucket: 75.5" | Radius - Rear with Standard Counterweight: 56.7"
Gauges
Track: 45.2"
Capacities
Fuel Capacity
15.7 gal.
Hydraulic Capacity
Reservior Tank: 9.2 gal.
Load Capacity, Land
Operating Capacity at 35% Tipping Load: 1,350 lbs. | Operating Capacity at 50% Tipping Load: 1,929 lbs. | Tipping Load: 3,857 lbs.
Oil capacity
Oil Pump Capacity: 6.8 qts.
Cooling
Coolant Capacity: 2.1 gal.
Drawbar Capacity
Drawbar Pull/Tractive Effort: 7,160 lbs.
Weights
Weight, In Running Order
Operating: 6,510 lbs.
Features
Track Type
Track Type/Track Rollers/Roller Type: Rubber/4/Steel